Application & Removal

Application

1 - Use the wooden stick to push your cuticles back.

2 - Clean the surface of your nail bed with the alcohol wipe.

3 - Take the mini file and buff the surface of your nail plate. Make sure you buff your entire nail plate, this will allow the glue and press on nail to properly adhere and last you 2-3 weeks of wear.

4 - Apply desired amount of nail glue to the press on nail.

5 - Carefully apply the press on nail closely to your cuticle area. Press down on your nail plate and hold for 10 -15 seconds.

Removal

• In order to safely remove the nails for reusable wear, you will need a bowl of warm water mixed with a few drops of oil.

• Soak your fingers in the bowl for 10-15 minutes. After the time is up carefully wiggle each press on nail from side to side until they come off.

• Use acetone to remove the remaining glue residue from your nail plate. Use the mini file provided to file off the glue from the press on nail. 

 While the mini file works well, I would suggest that you invest in a quality electric drill to remove glue residue for easy reusable wear. The electric drill will make this process much easier for you. 

If you do happen to have an electric drill make sure you are removing the glue residue at a low / medium setting to prevent cracking of the press on nail.